EMF Home Assessment

Make your home safer for you and your loved ones with a home assessment. We will thoroughly investigate and measure four types of EMF in your home. This is an interactive process with a chance for you to ask questions. The inspection concludes with a discussion of the findings and recommendations. A detailed written report is provided within two business days. During a home inspection Magnetic, Electric, Radio Frequency, and Dirty Electricity are measured.  Special attention is given to bedrooms since getting good quality sleep is vital to your health and wellbeing.  Read here about how EMF impacts your sleep and health.

Radio Frequency (RF)

RF is mostly generated by devices that communicate wirelessly. RF is actually radio and microwave frequencies in the 30 kHz to 300 GHz range but just commonly referred to as RF.  Sources inside your home could include your Wi-Fi, cellphone, laptop and microwave oven. Sources outside your home could be a nearby cell tower or smart meter.

Recently utility companies have been installing "smart meters" on private homes. These meters measure your consumption and transmit this information wirelessly back to the power, water and gas company. These meters emit RF, up to 18,000 pulses a day and are also a source of dirty electricity. During a home inspection I will check for smart meters and discuss ways to eliminate or reduce this source of EMF.

 Electric Fields (EF)

An electric field will exist wherever you have voltage so if something is energized you have an electric field. Current does not need to be flowing to have an electric field so the wiring within the walls of your home is creating an electric field all the time unless de-energized at the electrical service box (circuit breaker).

Magnetic Fields (MF)

A magnetic field will exist wherever you have current flowing. This means when current is flowing through the wires in your home, it creates a magnetic field. Magnetic fields are not easily shielded and penetrate through the walls, floors and ceilings. Magnetic fields are also created by motors like the one in a refrigerator. One of the most common causes of a high magnetic field is usually from electrical wiring that has been done incorrectly.

Dirty Electricity (DE)

Dirty Electricity is another term for what engineers call Electromagnetic Interference (EMI) or poor power quality. DE is frequencies or harmonics that are carried on electrical conductors that do not belong there. DE can be created inside the home by many different devices or come into your home on the electrical wiring from sources outside your home.

You can neither see nor feel most Electromagnetic Fields (EMF) except for a very small portion of the EMF spectrum that we see as visible light and feel as heat from ultraviolet radiation. It is our inability to sense most EMF and the ever-increasing evidence that the EMF levels we are exposed to cause biological harm that make it so important to reduce our exposure at home.

Contact me at EMFtrustedPro@gmail.com to schedule your home inspection and start reducing your exposure today.

Disclaimer: Dammit Jim, I am an engineer, not a doctor! The information shared on this website is the result of peer reviewed, scientific literature I have read. This is in no way medical advice. Should you need medical advice, please seek the help of a medical professional.